PLATES & GASKETS

Gasket Selection.

Provide the following information to our THS sales team for a quote at This email address is being protected from spambots. You need JavaScript enabled to view it. or 905-831-4963.
  • 1.
    Manufacturer
  • 2.
  • 3.
    Application (Water, Steam, Glycol)
  • 5.
  • 6.
    Quantity
  • 7.
    Type
  • 8.
    Nameplate Image

Model Finder

  1. Measure the center to center mm of the port holes horizontal (A) and vertical (B)
    along with the length (C), width (D) and port ring diameter (E).

  2. Choose Manufacturer for model chart 

KAPP & ARSOPI Gaskets

KAPP & ARSOPI Gaskets

Model FH 00 FH 01 FH 10
FH 11 / 22
FH 20
FH 21 / 22
FH 30
FH 31 / 32
FH 40
FH 41 / 42
A = mm 160 300 390 680 610 760
B = mm 331 842 1140 1520 1891.5 2135
             
Model FH 80 FH 90
UX 91 / 92
FH 100
102-103-104
FHE 11 FHE 15 FHS 40
FHS 43 / 45
A = mm   1450 1570 760 550 805
B = mm   2829 3640 + 2100 1445 2165
             
Model FHS 41/ 44 FHS 70
SX 71 / 74
FHR 00
FHR 01 / 02
FHR 10
FHR 13 / 14
FHR 30
FHR 31 / 32
FHR 70
FHR 71 / 72
A = mm 805 1070 242 460 660 900
B = mm 2165 2692 488 1212 1902 2434 +
             
Model FHL 00
FHL 01 / 02
FHL 10
FHL 11 / 12
FHL 20
FHL 21 / 22
FHL 30
FHL 31 / 32
FHL 40
FHL 41 / 42
FHL 50
FHL 51 / 52
A = mm 350 410 700 650 800 810
B = mm 860 1084 1571 1540 2075 1936

Material

Selecting the wrong gasket can be a timely and costly mistake. Let our experienced THS sales team recommend the most durable and cost effective gasket material for your application by providing us with the pressure, temperature and process liquid details.

Buna (NBR/Nitrile), EPDM or Viton materials are the most common plate & frame heat exchanger gaskets depending on the operating application.

Food Grade
Standard Grade
Aggressive Chemical Compounds

Changes in Gaskets:

  • Time – Relaxes
  • Temperature – Deteriorates
  • Oxidizing Agents – Hardens
  • Swelling – Chemical Absorption

Gaskets Material Depends on:

  • Fluids Used
  • Temperature and Pressure

Standard Gasket Styles

Clip - will usually have rubber tabs that are visible from the outside of the heat exchanger

Glue – no tabs and in most cases the brown glue is visible under the gasket; typically used in high pressure or high temperature applications

Ball - used in HVAC or FDA applications to allow for easy removal in the field 

HEAD OFFICE

1550 Bayly Street, Unit 15
Pickering, ON L1W 3W1

T 905 831-4963
F 905 831-0042

SERVICE CENTER

76 Harlowe Road, Unit 5, 6 & 7
Hamilton, ON L8W 3R6

T 905 318-0777
F 905-318-8422

This email address is being protected from spambots. You need JavaScript enabled to view it.