PLATES & GASKETS

Gasket Selection.

Provide the following information to our THS sales team for a quote at This email address is being protected from spambots. You need JavaScript enabled to view it. or 905-831-4963.
  • 1.
    Manufacturer
  • 2.
  • 3.
    Application (Water, Steam, Glycol)
  • 5.
  • 6.
    Quantity
  • 7.
    Type
  • 8.
    Nameplate Image

Model Finder

  1. Measure the center to center mm of the port holes horizontal (A) and vertical (B)
    along with the length (C), width (D) and port ring diameter (E).

  2. Choose Manufacturer for model chart 

HRS Gaskets

HRS Gaskets

Model CT-40 CT-80  CT-90 CT-95 CT-95DS* CT-100
A = mm 62 100 60 60 60 135
B = mm 430 533 357 357 357 590
             
Model CT-110 CT-120 CT-130  CT-140 CT-150 CT-160
A = mm 140 234 130 350 365 225
B = mm 640 703 625 1315 930 719
             
Model CT-160 W CT-160DS CT-170 CT-200 CT-210 CT-210DS
A = mm 225 225 225 130 140 140
B = mm 719 719 719 875 640 640
             
Model CT-220 CT-230 CT-240 CT-280 CT-450 CT-600 
A = mm 298 298 298 234 234 540
B = mm 1294 1294 1294 882 1302 1280
             
Model CT_1000 CT-1100 CT-1300 CT-1700  CT-2050 CT-2800
A = mm 310 600 480 700  
B = mm 2000 1320 1650 1650  

Material

Selecting the wrong gasket can be a timely and costly mistake. Let our experienced THS sales team recommend the most durable and cost effective gasket material for your application by providing us with the pressure, temperature and process liquid details.

Buna (NBR/Nitrile), EPDM or Viton materials are the most common plate & frame heat exchanger gaskets depending on the operating application.

Food Grade
Standard Grade
Aggressive Chemical Compounds

Changes in Gaskets:

  • Time – Relaxes
  • Temperature – Deteriorates
  • Oxidizing Agents – Hardens
  • Swelling – Chemical Absorption

Gaskets Material Depends on:

  • Fluids Used
  • Temperature and Pressure

Standard Gasket Styles

Clip - will usually have rubber tabs that are visible from the outside of the heat exchanger

Glue – no tabs and in most cases the brown glue is visible under the gasket; typically used in high pressure or high temperature applications

Ball - used in HVAC or FDA applications to allow for easy removal in the field 

HEAD OFFICE

1550 Bayly Street, Unit 15
Pickering, ON L1W 3W1

T 905 831-4963
F 905 831-0042

SERVICE CENTER

76 Harlowe Road, Unit 5, 6 & 7
Hamilton, ON L8W 3R6

T 905 318-0777
F 905-318-8422

This email address is being protected from spambots. You need JavaScript enabled to view it.